IPC Lifting & Positioning Device
Salient Features:
- Design is cGMP – Current Good Manufacturing Practices compliance.
- All contact parts AISI 316 & non-contact parts AISI 304.
- Capacity available from 30 Kg to 600 Kg.
- Suitable for inline process with Milling and Sifter.
- Suitable for loading material into High Shear Mixer, Blender, Tablet Press, Blister Pack Machines, etc.
- 360-degree swiveling movement of lifting arm.
- Loading height designed as per end user requirement and slab height.
- Structure cladding made of S.S. 304 with matt finished.
- Hydraulic power pack system for lifting.
- If the power goes off, the loader remains where it was.
- Limit switches provided to stop hydraulic drive when stroke is completed.
Related products
Autocoater
Salient Features:
- Film & sugar coating in one machine (Optional).
- Punched hole pan design: Faster drying. Short operation time
- 09. Auto coater model 66 & above can be provided with auto discharge system: Easy & clean.
- Explosion proof system for organic solvent available.
- Auto damper design for total isolation from outdoor reverse airflow: Easy control & regulate.
- 4. Auto control by PLC: Easy operation.
- Data recordable for the whole process: Easy for operator training.
- Special baffle design for even tablet mixing.
Coating Pan
Salient Features:
- SS 316 pan and other contact parts.
- Baffles inside the pan for proper tumbling of the tablets.
- Hot air blower to ensure faster drying of the tablets Gearbox and motor fitted in SS enclosure behind the machine
- Angle of the pan can be changed to suit individual requirements.
- Flameproof motor & electricals available as option.
- Interchangeable pans on the same machine for smaller models.
- Spraying system with solution vessel, pneumatic stirrer, peristaltic pump, and spray nozzle with control panel.
Fluid Bed Dryer
Salient Features:
- cGMP model with contact parts in SS 316 single-piece design.
- Uniformity in drying and fast drying time.
- Online sampling port in product container.
- Inlet AHU with HEPA filtration, dehumidification system, etc.
- Automatic shaking system with 3-stage telescopic cylinder.
- PLC-based control panel, 21 CFR compliant.
- Vacuum transfer system for product transfers available as an option.
- Rupture disk.
- Top sprayer system with solution vessel & peristaltic pump provided as optional.
Multimill
Salient Features:
- GMP model with SS 316 contact parts.
- Direction of beaters can be changed by reversible switch.
- All contact parts can be easily and quickly dismantled and cleaned.
- Machine is designed for continuous operation.
- Cylindrical screen for higher output.
- Castor wheels provided for mobility.
- Flameproof electrical components can be provided at extra cost.
- Option for direct-driven motor with mechanical seal available.
Oscillating Granulator
Salient Features:
- Available in Single Hopper & Double Hopper with single drive system.
- GMP Model with SS 316 contact parts.
- Diamond Shaped Horizontal Blades for proper granulation.
- Reduced fine powder formation.
- Perforated sieves available in various sizes.
Paste Kettle
Salient Features:
- Tilting type design available in manual / pneumatic type.
- Hemispherical bottom for greater heat area.
- cGMP model in SS 316 contact parts.
- Electrically or steam heated jackets.
- Agitator with variable speed drive provided Auto temp control
POLISHING PAN
We are leading coating pan manufacturer in mumbai.
Coating Pan machine is consists of an Ellipsoidal pan mounted on a suitable stand and driven by a motor through the right gearbox. The pan is made out of SS 316 and has welded baffles in it. This baffle helps in the tumbling of the tablets/material into the pan while rotating. The speed can be changed by a 3 step pulley or a variable speed drive provided in the control panel. It supplies a hot air blower and the coating pan with heater assembly and a flexible SS pipe, which goes into the pan to dry the tablets/material into the pan after coating. A Control panel helps provide a Starter or variable speed drive, Digital temp controller for controlling temperature.
A spraying system with the pan coating for film coating/sugar coating into the coating pan’s tablets/material. It consists of a suitable capacity pressurized vessel with spray guns mounted on a stand. The liquid into the container is pressurized and sprayed into the coating pan on the coated material. A peristaltic pump helps offer a transfer of fluid into the spray gun and then spread it into the pan.
We provide an exhaust blower as an option for exhausting fumes generated by the liquid spraying into the coating pan’s tablets/material.
A wet scrubber helps neutralize the exhaust fumes before entering the open atmosphere.
Whatsapp Enquiry
Tray Dryer
Salient Features:
- Single piece construction eliminates accumulation of dust on the dryer.
- Full welded internals with curved corners.
- Designed for uniform circulation of hot air in the drying chamber. Electrical/Steam/Thermic fluid/LPG/HSD burner heating available.
- Inlet is provided with 10 microns filter.
- Heating coils and fan motor have electrical interlocking.
- Digital temperature controller and digital timer are standard scope of supply.
Reviews
There are no reviews yet.