Fluid Bed Bowl Tipper
Salient Features:
- Design is cGMP – Current Good Manufacturing Practices compliance.
- All contact parts AISI 316 & non-contact parts AISI 304.
- Capacity available 30 Kg to 600 Kg.
- Unloaded material with inline process using cone mill, granulator, and IBC Bin for dust-free operation.
- Fully automatic system with hydraulic lifting and tipping arrangement for quick and easy handling.
- Eliminates tedious and unhygienic manual handling of products.
- Tilting arrangement with a single point pivot ensures GMP compliance and ease of operation.
- 180-degree swiveling of vertical mast with vertical lift and tippling ensure motion in all three dimensions as required.
- Discharge cone fitted with butterfly valve at the bottom with silicon rubber seat.
- Hydraulic power pack can be mounted over the service floor, allowing hydraulic lines and electric cables to pass through the hollow pivot shaft above the working area slab.
Category: Tablet & Coating Section
Reviews (0)
Be the first to review “Fluid Bed Bowl Tipper” Cancel reply
Shipping & Delivery
Related products
Autocoater
Salient Features:
- Film & sugar coating in one machine (Optional).
- Punched hole pan design: Faster drying. Short operation time
- 09. Auto coater model 66 & above can be provided with auto discharge system: Easy & clean.
- Explosion proof system for organic solvent available.
- Auto damper design for total isolation from outdoor reverse airflow: Easy control & regulate.
- 4. Auto control by PLC: Easy operation.
- Data recordable for the whole process: Easy for operator training.
- Special baffle design for even tablet mixing.
Fluid Bed Dryer
Salient Features:
- cGMP model with contact parts in SS 316 single-piece design.
- Uniformity in drying and fast drying time.
- Online sampling port in product container.
- Inlet AHU with HEPA filtration, dehumidification system, etc.
- Automatic shaking system with 3-stage telescopic cylinder.
- PLC-based control panel, 21 CFR compliant.
- Vacuum transfer system for product transfers available as an option.
- Rupture disk.
- Top sprayer system with solution vessel & peristaltic pump provided as optional.
IPC Bins
Salient Features:
- Design is cGMP – Current Good Manufacturing Practices compliance.
- All contact parts AISI 316/316L & non-contact parts AISI 304.
- Capacity available from 30 Kg to 1000 Kg.
- Charging through the top opening.
- Discharging through bottom discharge butterfly valve.
- Without any nooks and corners for easy cleaning with food grade silicon gaskets.
- Option for various types of IPC Bin as per customer requirement.
- Available in round shape, Conta Bins etc as required.
MINI COTA (SPRAYING SYSTEM)
The Mini Cota (Semi-Automatic Spray Coating Machine) is designed to replace conventional manual coating of tablets and granules. It provides a rapid and uniform coating system with multiple functional features and advantages.
This compact machine is equipped with a specially designed stainless steel (S.S.) spray gun for atomized spraying. Compared to fully automatic systems, which are 15-20 times more expensive, the Mini Cota offers a more economical and user-friendly alternative.
Key Features:
Pressure vessel with an optional S.S. jacket (for sugar coating) and thermostatically controlled heaters Safety valve for pressure control Oscillating-type pneumatic stirrer for uniform mixing Spraying nozzles for precise coating application Compact control panel with a double-acting pneumatic cylinder for intermittent spraying of liquid and air Adjustable spray cycle timing for controlled coating application Filter cum moisture separator to ensure a clean coating process Operation & Mechanism: The Bombay Engineering Mini Cota consists of a pressure vessel, which can be optionally provided with an S.S. jacket for sugar coating, controlled heaters, a safety valve, an oscillating-type pneumatic stirrer, and spraying nozzles. It also includes a compact control panel with a pneumatic cylinder, ensuring precise intermittent spraying controlled by a timer. The coating solution is filled into the pressure vessel and pressurized using oil/moisture-free compressed air at 3 to 4 kg/cm², resulting in a uniform, atomized conical spray. The spray guns, mounted on a heavy-duty S.S. stand, can be adjusted as required. The duration of air and liquid spray is controlled by a digital timer and pneumatic cylinder via a solenoid valve. Available Capacities: 25 liters to 100 liters Whatsapp EnquiryRapid Mixer Granulator
Salient Features:
- cGMP model with contact parts in SS 316 & non-contact parts in SS 304.
- Homogeneous product distribution.
- Pneumatic top lid lifting system.
- Bottom impeller lifting system.
- 3/4 blade main impeller and 4 blade chopper impeller.
- CIP & binder addition system through pump.
- Variable speed drive for main and chopper motors.
- Online Comill at discharge.
- PLC in control panel, 21 CFR compliant.
TABLET DEDUSTER
Overview:Â Tablet De-Dusting & De-Burring Machine
Bombay Engineering manufactures, supplies, and exports a high-quality range of Tablet De-Dusting & De-Burring Machines designed to remove excess powder and burs from compressed tablets. These machines are built to conform with international standards, ensuring top-notch performance.
Key Features:
✔ Premium Construction: All contact parts are made from SS 304 stainless steel for durability and hygiene.
✔ Efficient Dusting and Cleaning: Utilizes compressed air for effective tablet de-dusting and cleaning.
✔ Compatibility: Can be easily integrated with rotary tablet press machines, making it an ideal solution for fine de-dusting and tablet movement.
✔ Automatic Dust Removal: Features an automatic dust-removal system for continuous, efficient operation.
The Bombay Engineering De-Burring & De-Dusting Machine is built to provide outstanding performance, ensuring clean, dust-free tablets with minimal energy consumption and easy maintenance.
Whatsapp Enquiry
Tray Dryer
Salient Features:
- Single piece construction eliminates accumulation of dust on the dryer.
- Full welded internals with curved corners.
- Designed for uniform circulation of hot air in the drying chamber. Electrical/Steam/Thermic fluid/LPG/HSD burner heating available.
- Inlet is provided with 10 microns filter.
- Heating coils and fan motor have electrical interlocking.
- Digital temperature controller and digital timer are standard scope of supply.


Reviews
There are no reviews yet.