Tablet & Coating Section
Autocoater
Salient Features:
- Film & sugar coating in one machine (Optional).
- Punched hole pan design: Faster drying. Short operation time
- 09. Auto coater model 66 & above can be provided with auto discharge system: Easy & clean.
- Explosion proof system for organic solvent available.
- Auto damper design for total isolation from outdoor reverse airflow: Easy control & regulate.
- 4. Auto control by PLC: Easy operation.
- Data recordable for the whole process: Easy for operator training.
- Special baffle design for even tablet mixing.
BOMBAY COATER
SALIENT FEATURES:
- Automated process
- Conforms to cGMP
- Flexible batch operations
- Product protective handling to prevent clipping of tablets
- Complete separation of production and technical area
- Extremely user-friendly software and operation through PLC
- Excellent mixing and tumbling by special design of baffles
- Made entirely of S.S. 316
- Advanced CIP system
- Treatment of exhaust for pollution-free operation
AVAILABLE CAPACITIES: 12", 15", 18", 24", 36", 48", 60“, 66", 72" & 96" Diameter.
Co-Mill
Salient Features:
- Design is cGMP - Current Good Manufacturing Practices compliance.
- All product contact parts SS 316 & non-contact parts SS 304.
- High-speed milling, granulating, mixing, and size reduction.
- Available in three models with different capacity for production scale.
- Uniform size reduction of wet material.
- AC frequency variable speed 100 to 1400 RPM.
- Easy removable contact parts for cleaning, inspection, and easy mobility.
- Various combinations of perforated sieves.
Capacity: 100 to 250 kg/hr (depend upon material & mesh size). Whatsapp Enquiry
Coating Pan
Salient Features:
- SS 316 pan and other contact parts.
- Baffles inside the pan for proper tumbling of the tablets.
- Hot air blower to ensure faster drying of the tablets Gearbox and motor fitted in SS enclosure behind the machine
- Angle of the pan can be changed to suit individual requirements.
- Flameproof motor & electricals available as option.
- Interchangeable pans on the same machine for smaller models.
- Spraying system with solution vessel, pneumatic stirrer, peristaltic pump, and spray nozzle with control panel.
Dust Extractor
Overview:
The Dust Extractor Machine is essential for preventing dust accumulation and avoiding cross-contamination during tablet manufacturing in the pharmaceutical industry. This machine enhances tablet production efficiency by removing dust from punches and dies, minimizing breakdowns, and reducing mechanical strain on tablet-making equipment.
Key Features:
✔ Effective Dust Removal: Utilizes a shaking mechanism to dislodge dust, which is then collected by the dust collection system fans.
✔ Ease of Maintenance: Fan and filter compartments are easily accessible through doors for quick inspection and maintenance.
✔ Cross-Contamination Prevention: Helps control flying dust generated during tablet compression and minimizes cross-contamination risks.
Advantages:
✔ Tool-Free Dismantling: The machine can be fully dismantled without tools for easy and fast cleaning.
✔ Low Noise Level: Operates with very low noise, making it user-friendly.
✔ Low Maintenance: Requires minimal upkeep, ensuring consistent performance.
✔ Easy Mobility: Mounted on castors for easy handling and quick connection to auger powder filling machines, rotary tablet presses, or de-dusters.
✔ Easy Integration: Easily integrates into process lines and can be connected to tablet presses without hassle.
✔ Optional Flame-Proof Electrical Components: Available with flame-proof electrical components for added safety.
The Dust Extractor Machine by Bombay Engineering ensures a clean, efficient, and safe tablet manufacturing environment, reducing dust hazards, mechanical strain, and cross-contamination risks.
Whatsapp Enquiry
Fluid Bed Bowl Tipper
Salient Features:
- Design is cGMP - Current Good Manufacturing Practices compliance.
- All contact parts AISI 316 & non-contact parts AISI 304.
- Capacity available 30 Kg to 600 Kg.
- Unloaded material with inline process using cone mill, granulator, and IBC Bin for dust-free operation.
- Fully automatic system with hydraulic lifting and tipping arrangement for quick and easy handling.
- Eliminates tedious and unhygienic manual handling of products.
- Tilting arrangement with a single point pivot ensures GMP compliance and ease of operation.
- 180-degree swiveling of vertical mast with vertical lift and tippling ensure motion in all three dimensions as required.
- Discharge cone fitted with butterfly valve at the bottom with silicon rubber seat.
- Hydraulic power pack can be mounted over the service floor, allowing hydraulic lines and electric cables to pass through the hollow pivot shaft above the working area slab.
Fluid Bed Dryer
Salient Features:
- cGMP model with contact parts in SS 316 single-piece design.
- Uniformity in drying and fast drying time.
- Online sampling port in product container.
- Inlet AHU with HEPA filtration, dehumidification system, etc.
- Automatic shaking system with 3-stage telescopic cylinder.
- PLC-based control panel, 21 CFR compliant.
- Vacuum transfer system for product transfers available as an option.
- Rupture disk.
- Top sprayer system with solution vessel & peristaltic pump provided as optional.
Fritzmill / Communiting Mill
Salient Features:
- GMP model with SS 316 contact parts.
- Direction of beaters can be changed by reversible switch.
- All contact parts can be easily and quickly dismantled and cleaned.
- Water jacketed & Plain models available.
- Machine is designed for continuous operation.
- Perforated screen of different sizes available.
- Castor wheels provided for mobility.
- Flameproof electrical components can be provided at extra cost.
IPC Bins
Salient Features:
- Design is cGMP – Current Good Manufacturing Practices compliance.
- All contact parts AISI 316/316L & non-contact parts AISI 304.
- Capacity available from 30 Kg to 1000 Kg.
- Charging through the top opening.
- Discharging through bottom discharge butterfly valve.
- Without any nooks and corners for easy cleaning with food grade silicon gaskets.
- Option for various types of IPC Bin as per customer requirement.
- Available in round shape, Conta Bins etc as required.
IPC Lifting & Positioning Device
Salient Features:
- Design is cGMP - Current Good Manufacturing Practices compliance.
- All contact parts AISI 316 & non-contact parts AISI 304.
- Capacity available from 30 Kg to 600 Kg.
- Suitable for inline process with Milling and Sifter.
- Suitable for loading material into High Shear Mixer, Blender, Tablet Press, Blister Pack Machines, etc.
- 360-degree swiveling movement of lifting arm.
- Loading height designed as per end user requirement and slab height.
- Structure cladding made of S.S. 304 with matt finished.
- Hydraulic power pack system for lifting.
- If the power goes off, the loader remains where it was.
- Limit switches provided to stop hydraulic drive when stroke is completed.
Mass Mixer
Salient Features:
- Suitable for mixing of dry & wet material.
- All contact parts in stainless steel S.S. 316 material.
- Paddles arranged on the shaft to give uniform mixing.
- Tilting arrangement, reversible switch, and safety switch to stop the mixer as soon as the cover is opened.
- Suitable seals provided at both ends of the trough to prevent black particles in the material.
- Flameproof motor and electricals available as optional.
- Motorized tilting system available as optional.
