Oscillating Granulator

know about oscillating granulator

Oscillating Granulator

Oscillating Granulator is used for gentle homogenization, size reduction, grading and sieving of dry, sensitive powders and granules in pharmaceutical, chemical and food industries.

Oscillating Granulator has one rotor with five edges, which oscillate on horizontal axis at about 180 per minutes. There is one half round sieve mounted at the bottom of the rotor. Product is charged from the top through in feed hopper and material falls on the rotor blades. The particles are broken by a set of oscillating bars arranged in cylindrical form over a screen of suitable mesh. Due to the sharp edges on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening.

 

  • Robust, Simple & Compact Design.
  • Stainless Steel Construction.
  • Easy Installation in Production Line.
  • Oscillating Rotor Motion.
  • High Output.
  • Uniform Granules, Less Fines.
  • Low noise level as per international norms.
  • Maintenance Free.
  • Easy for Cleaning.
  • AVAILABLE CAPACITIES : 10 kgs to 250 kgs.
TYPE BEW-8 BEW-12
Hopper Size 8” (200 mm) 12” (300 mm)
Electric Motor 1 H.P. 1440 R.P.M. 440 V, 3 Phase, 50 Cycles, A.C.
Output * 200 KGS/Hr. 650 KGS/ Hr.
Overall Dimensions (mm) 736 L x 450 W X 1207 H 1095 L x 628 W X 1518 H
Case Dimensions (cm) 950 L x 650 W x 1300 H 1300  L X 850 W X 1700 H
Net Weight 250 Kgs 500 Kgs
Gross Weight 370 Kgs 620 Kgs