Multimill
Salient Features:
- GMP model with SS 316 contact parts.
- Direction of beaters can be changed by reversible switch.
- All contact parts can be easily and quickly dismantled and cleaned.
- Machine is designed for continuous operation.
- Cylindrical screen for higher output.
- Castor wheels provided for mobility.
- Flameproof electrical components can be provided at extra cost.
- Option for direct-driven motor with mechanical seal available.
Related products
Autocoater
Salient Features:
- Film & sugar coating in one machine (Optional).
- Punched hole pan design: Faster drying. Short operation time
- 09. Auto coater model 66 & above can be provided with auto discharge system: Easy & clean.
- Explosion proof system for organic solvent available.
- Auto damper design for total isolation from outdoor reverse airflow: Easy control & regulate.
- 4. Auto control by PLC: Easy operation.
- Data recordable for the whole process: Easy for operator training.
- Special baffle design for even tablet mixing.
Fluid Bed Bowl Tipper
Salient Features:
- Design is cGMP - Current Good Manufacturing Practices compliance.
- All contact parts AISI 316 & non-contact parts AISI 304.
- Capacity available 30 Kg to 600 Kg.
- Unloaded material with inline process using cone mill, granulator, and IBC Bin for dust-free operation.
- Fully automatic system with hydraulic lifting and tipping arrangement for quick and easy handling.
- Eliminates tedious and unhygienic manual handling of products.
- Tilting arrangement with a single point pivot ensures GMP compliance and ease of operation.
- 180-degree swiveling of vertical mast with vertical lift and tippling ensure motion in all three dimensions as required.
- Discharge cone fitted with butterfly valve at the bottom with silicon rubber seat.
- Hydraulic power pack can be mounted over the service floor, allowing hydraulic lines and electric cables to pass through the hollow pivot shaft above the working area slab.
Fluid Bed Dryer
Salient Features:
- cGMP model with contact parts in SS 316 single-piece design.
- Uniformity in drying and fast drying time.
- Online sampling port in product container.
- Inlet AHU with HEPA filtration, dehumidification system, etc.
- Automatic shaking system with 3-stage telescopic cylinder.
- PLC-based control panel, 21 CFR compliant.
- Vacuum transfer system for product transfers available as an option.
- Rupture disk.
- Top sprayer system with solution vessel & peristaltic pump provided as optional.
Fritzmill / Communiting Mill
Salient Features:
- GMP model with SS 316 contact parts.
- Direction of beaters can be changed by reversible switch.
- All contact parts can be easily and quickly dismantled and cleaned.
- Water jacketed & Plain models available.
- Machine is designed for continuous operation.
- Perforated screen of different sizes available.
- Castor wheels provided for mobility.
- Flameproof electrical components can be provided at extra cost.
IPC Lifting & Positioning Device
Salient Features:
- Design is cGMP - Current Good Manufacturing Practices compliance.
- All contact parts AISI 316 & non-contact parts AISI 304.
- Capacity available from 30 Kg to 600 Kg.
- Suitable for inline process with Milling and Sifter.
- Suitable for loading material into High Shear Mixer, Blender, Tablet Press, Blister Pack Machines, etc.
- 360-degree swiveling movement of lifting arm.
- Loading height designed as per end user requirement and slab height.
- Structure cladding made of S.S. 304 with matt finished.
- Hydraulic power pack system for lifting.
- If the power goes off, the loader remains where it was.
- Limit switches provided to stop hydraulic drive when stroke is completed.
Octagonal Blender
Chemical Machinery, Blenders, Pharmaceutical Machinery, Dry Syrup Section, Mixers, Tablet & Coating Section
Salient Features:
- Suitable for dry mixing of products in granule form.
- Octagon shape gives tumbling action & baffles provide proper mixing of the material.
- Easy to clean with CIP Spray Ball.
- All contact parts are made out of SS 316.
- Safety guards with interlocking.
- Flame proof motor and electrical available as option.
- Vacuum compatible powder loading system PLC in control panel. (Optional)
Oscillating Granulator
Salient Features:
- Available in Single Hopper & Double Hopper with single drive system.
- GMP Model with SS 316 contact parts.
- Diamond Shaped Horizontal Blades for proper granulation.
- Reduced fine powder formation.
- Perforated sieves available in various sizes.
Tray Dryer
Salient Features:
- Single piece construction eliminates accumulation of dust on the dryer.
- Full welded internals with curved corners.
- Designed for uniform circulation of hot air in the drying chamber. Electrical/Steam/Thermic fluid/LPG/HSD burner heating available.
- Inlet is provided with 10 microns filter.
- Heating coils and fan motor have electrical interlocking.
- Digital temperature controller and digital timer are standard scope of supply.
Reviews
There are no reviews yet.