Coating pan is consists of an Ellipsoidal pan mounted on a suitable stand and driven by a motor through suitable gear box. The pan is made out of SS 316 and has welded baffles in it. This baffles helps in tumbling of the tablets / material into the pan while rotating. The speed can be changed by a 3 step pulley or by a variable speed drive provided in the control panel. There is a Hot air blower provided along with the coating pan with heater assembly and a flexible SS pipe which goes into the pan for drying of the tablets / material into the pan after coating. Control panel is provided which consists of a Starter or variable speed drive, Digital temp controller for controlling temperature.