• All contact parts are SS 316 L, and non-contact parts are SS 304.
• Manufacturing vessels have an opening arrangement of top dish hydraulically operated.
• We use Silicone food grade gaskets.
• The top-mounted mixer with an SS 316 L anchor with a mirror polish and PTFE arranged baffles/scrapper.
• We provide a high-speed homogenizer at the bottom arrangement with a mechanical seal.
• High sanitary standard Design & Manufacturing.
• All material transfers are done by vacuum or by transfer pumps.
• We equipped the entire plant with CIP & SIP connections.
• The jacket has heating & cooling with a temperature controller.
• VFD for Anchor agitators to vary the RPM as per Recipe and required process.
• The vacuum system helps transfer product from one vessel to another vessel and zero retention in a pre-phase vessel & interconnecting pipeline.
• Vessel design as per ASME guidelines.
• AVAILABLE CAPACITIES: 5 ltrs to 10,000 ltrs.

A.) WAX/OIL PHASE & WATER VESSEL SPECIFICATIONS :

• Material of construction :

B.) MANUFACTURING VESSEL

• Material of construction :

C.) PRODUCT PIPELINE :

Pipeline will cover the following :
1) Water phase vessel to Mixing vessel thru pump
2) Wax phase vessel to Mixing Vessel thru pump & conical filter
3) Mixing Vessel for re-circulation
4) Mixing vessel to Storage Vessel through lobe pump.
5) Storage vessel to hopper of filling machine through transfer pump.

All pipe are seamless & electropolished from inside and outside. Fittings are DIN standard with silicon gasket.

D.) ELECTRIC CONTROL PANEL :

It shall consist of –

• Main isolator
• DOL starter for Anchor drive
• DOL starter for HSE motor
• Machine light switch for main Mixing Vessel
• Electrical Digital temperature indicator for all vessel
• Fuses for all motors
• Ammeter for anchor and HSE motors
• Indicating lamps for main ON & OFF with selector switch.
• DOL starters for propeller agitators of Wax & water Phase vessels
• DOL Starters for all the pumps

E.) PUMPS :

CENTRIFUGAL PUMP –

• Rate : 400 Ltrs/Hr
• MOC : SS 316Q
• Inlet & Outlet : DIN fitting with T connection at inlet & outlet
• Above pump is used to transfer wax & water to the main mixing tank.

BUMP PUMP :
Above pump is used to recirculate final mixed cream for intense mixing & to transfer finished cream from Mixing vessel to storage vessel. Other details are as below.
1) Type : Twin BUMP
2) Design : Sanitary
3) Drive : suitable HP, 200 RPM gearbox & motor
4) Seal : Teflon bush
5) Mounting : Trolley mounted , MOC – SS304Q
6) Inlet & outlet : DIN fittings / triclover at inlet & outlet.
7) MOC : SS 316Q for contact parts

TRANSFER PUMP – RECIPROCATING TYPE, POSITIVE DISPLACEMENT & METERING TYPE
Above pump is used to transfer CREAM/OINTMENT from storage vessel to hopper of filling machine.

a) Type : Reciprocating Plunger type
b) Capacity : 1000 LtR./Hr
c) Drive : suitable HP, 1440 RPM
d) Head : 2.5 Mtr.
e) Mounting : Trolley mounted , MOC – SS304Q

The above pump doses metered quantity of cream into the hopper of filling machine which suits filling rate of filling machine. There is control feed back system between Filling machine & pump.

VACUUM PUMP :
Above pump is suitable HP & capacity depending on the capacity of the ointment plant vessel . watering / oilring type with silencer & non return valve.

F.) STORAGE TANK:

The vessel shall be in SS 316Q having cylindrical conical bottom. The vessel will be provided with 40mm ball valve. Shell portion will be flanged from top & bolted to top dish with gasket in bet-ween. All joints are fusion free argon arc welded & inside mirror finished.
The vessel will be supported by 4 nos. cladded ‘C’ class 3” pipe and to maintain 450mm ground clearance. Vessel has 50mm inlet nozzle for finished product entry & vent.

G.) WORKING PLATFORM :

This platform will cover both tanks & with AL dimpled plate and SS counter sunk screw. SS 304 Q railing on either side. There is provision of steps on either side.