The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of the required grade by the customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical, and Cosmetic products, etc.
Double Cone Blender
Double Cone Blender is an efficient and versatile machine for mixing dry powders and granules homogeneously. All the contact parts are made of stainless steel. The adequate volume for optimum homogeneity is between 35-70% of gross volume. The SLANT double cone design eliminates dead spots that occasionally occur in a conventional double cone mixer. It can be used for pharmaceutical, food, chemical, cosmetic products, etc. The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by the customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical, and Cosmetic products, etc.
SALIENT FEATURES:
The conical shape at both ends enables uniform mixing and easy discharge.
All contact parts are made out of stainless 304 or 316 quality material, as required by the customer. Maximum care has been taken to ensure the safe operation of the unit.
Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. (In 200 Kgs. & above model) Two nos. of safety road will be provided at the backside.
(One L.H. side & one R.H. side) Suitable size of a butterfly valve at one end of the cone provided material discharge & hole with openable cover provided at other cone ends for material charging & cleaning.
One shaft with 04 nos. of fixed baffles with mirror polished provided inside the cone.
Cone will be mirror polished from the inside & outside & the structure will be matt polished. All moving parts are covered with SS304 covers. Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
Panel fabricated from SS304 material with three-phase indication, D.O.L. starter, digital timer & Amp. Meter. As per customer requirement, the machine will be provided with left side drive or with right side drive. The conical shape at both ends enables uniform mixing and easy discharge.
All contact parts are made out of SS304/316(as per customer requirement) quality material. Maximum care has been taken to ensure the safe operation of the unit.
Worm reduction gear use for speed reduction. Food grade rubber gasket will be used on both ends of the cone and the butterfly valve. Inside & outside of the cone will be polished to the mirror finished.
General structure made out of SS304 and Polished to the matt/mirror finish (as required by you) in G.M.P. Model. All safety guards & covers made out of SS304 in the G.M.P. Model.
A handwheel will be provided for manual tilting of the cone. Safety guards are provided with a limit switch not to start the machine when safety guards are not correctly positioned.
Primary Features
- The conical shape at both ends enables uniform mixing and easy discharge.
- The cone is statically balanced, which protects the gearbox and motor from any excessive load.
- The powder is loaded into the cone through a wide opening and discharged through a butterfly or a Slide valve.
- Depending upon the product’s characteristic, paddle-type baffles can be provided on the shaft for better.
- Contact parts are made of SS 304 or SS 316.
- Flameproof electricals can be provided as optional.
- ‘Slant’ design (off-center) CONE BLENDER.
- A dust-free bin charging system ensures minimum material handling.
- Mixing, uniform blending, and de-agglomeration.
Applications of Double Cone Blender Machine
The chemical industry is used to mix chemicals, dry powdered detergents, glass or ceramic, fertilizer, etc.
Different ingredients are used in the pharmaceutical industry. To mix the ingredients dry powder mixing cone blender has been used.
The dry blending of free-flowing solids dry powder mixing cone blender is used in the food industry. It is used in the preparation of spices, flavors, cake mix, and other solid ingredients.