Tray Dryer

DESCRIPTION :
1) CONSTRUCTION :
EXTERNAL : 2MM THK, INTERNAL:2MM THK, MOC: cGMP.

2) SURFACE FINISH :
EXTERNAL : Buffed to 150 grit matt finish, INTERNAL: Buffed to 220 grit mirror finish.

3) INLET & OUTLET :
All dryers have a 5 micron pre-filter at the inlet and a manually infinite adjustable damper at the outlet.

4) DOOR :
Doors are provided at the front or rear side of the tray dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors.

5) AIR CIRCULATION :
Air circulation is done by specially designed recirculation blowers inside the tray dryer. The blower capacity, static & design depends on the size and model of dryer.

6) HEATING :
Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / clarifiers are provided in the dryers.

7) TEMPERATURE CONTROL :
Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.

8) TRAYS :
Trays are available in S.S. 304 / 316. All trays are fully die pressed and with coved corners. Trays are buffed to mirror finish. Trays are also available in aluminium / Polypropylenes / FRP / M.S. galvanized as per client requirements.

9) TROLLEY :
Trolley is provided in the dryers to accommodate trays in it. Trolley trucks are used to load and unload the trays into the dryer.

10) CONTROL PANEL :
Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons, timers, controllers etc.

AVAILABLE CAPACITIES :
• 3 trays, 6 trays, 12 trays, 24 trays, 48 trays, 96 trays and 192 trays.
• Standard, GMP & cGMP models available with SS 304/SS, 316/MS internals and externals.

Enquire Now



error: Content is protected !!