SPECIFICATIONS OF “THE BOMBAY ENGINEERING WORKS” MASS MIXER
Consisiting of 'U' trough of suitable dimensions. Construction
of S.S. and side plates duly M.S. stiffened from outside
and from inside with S.S.
MIXING MECHANISM : Paddle type blades
welded to the main shaft provide for efficient mixing
of thick heavy material. PTFE gland mechanism provided
at shaft ends prevents ingress of external powder into
the trough and prevents leakage.
CHARGING : From the top charging can
be done through a hingeable lid, hopper or Nozzle can
be provided for additional spraying of additives.
DISCHARGE : By bottom discharge slide
Iris or Butterfly valve of suitable diameter, for regulated
: Consisting of suitable H.P. TEFC 3 phase
ac 415v / 50 cycles motor coupled to suitable worm gear,
with driving shafts mounted on suitable plummer block.
MOUNTING: Mounted on suitable ISMC
Section Stand, with protective covers for belts and
MOC : All contact parts in S.S. Constructions.
Complete unit with S.S. cover and all surfaces polished
to mirror dull finish. MS parts dull painted to smooth
OPTIONS AVAILABLE : The control panel
is mounted on platform and is provided with
1. Unit with FLP
2. Unit in S.S. 316
3. GMP Model with M.S. parts cladded with S.S.